怎么样网站泛解析,什么是sem和seo,承德网,小浪底水利枢纽建设管理局网站文章目录1. 创建文件config.txt2. 创建nacos-config.sh3. 配置导入nacos配置中心4. 配置验证1. 创建文件config.txt
在seata的安装文件夹下创建文件config.txt
[rootnode2 ~]# cd /app/seata/seata-server-1.4.2/
[rootnode2 seata-server-1.4.2]# vim config.txt 说明#…
文章目录1. 创建文件config.txt2. 创建nacos-config.sh3. 配置导入nacos配置中心4. 配置验证1. 创建文件config.txt
在seata的安装文件夹下创建文件config.txt
[rootnode2 ~]# cd /app/seata/seata-server-1.4.2/
[rootnode2 seata-server-1.4.2]# vim config.txt 说明 第一行这里order-service值得是订单模块的服务 从第二行开始下面是数据库信息根据自己的实际情况配置 注意点不能添加中文注释 添加以下内容
service.vgroupMapping.order-servicedefault
store.modedb
store.db.datasourcedruid
store.db.dbTypemysql
store.db.driverClassNamecom.mysql.cj.jdbc.Driver
store.db.urljdbc:mysql://127.0.0.1:3306/ry-seata?useUnicodetrue
store.db.userroot
store.db.password123456
store.db.minConn5
store.db.maxConn30
store.db.globalTableglobal_table
store.db.branchTablebranch_table
store.db.queryLimit100
store.db.lockTablelock_table
store.db.maxWait5000上面的文件是精简后的部分完整文件可在github中找到
https://github.com/seata/seata/blob/develop/script/config-center/config.txt
2. 创建nacos-config.sh
在conf/文件夹下下载文件 https://github.com/seata/seata/blob/develop/script/config-center/nacos/nacos-config.sh 用于将上面的seata配置信息导入到nacos 执行下面的命令
[rootnode2 seata-server-1.4.2]# cd conf
[rootnode2 conf]# vim nacos-config.sh
内容比较多建议直接下载吧#!/bin/sh
# Copyright 1999-2019 Seata.io Group.
#
# Licensed under the Apache License, Version 2.0 (the License);
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at、
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an AS IS BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.while getopts :h:p:g:t:u:w: opt
docase $opt inh)host$OPTARG;;p)port$OPTARG;;g)group$OPTARG;;t)tenant$OPTARG;;u)username$OPTARG;;w)password$OPTARG;;?)echo USAGE OPTION: $0 [-h host] [-p port] [-g group] [-t tenant] [-u username] [-w password] exit 1;;esac
doneif [ -z ${host} ]; thenhostlocalhost
fi
if [ -z ${port} ]; thenport8848
fi
if [ -z ${group} ]; thengroupSEATA_GROUP
fi
if [ -z ${tenant} ]; thentenant
fi
if [ -z ${username} ]; thenusername
fi
if [ -z ${password} ]; thenpassword
finacosAddr$host:$port
contentTypecontent-type:application/json;charsetUTF-8echo set nacosAddr$nacosAddr
echo set group$groupurlencode() {length${#1}i0while [ $length -gt $i ]; dochar${1:$i:1}case $char in[a-zA-Z0-9.~_-]) printf $char ;;*) printf %%%02X $char ;;esaciexpr $i 1done
}failCount0
tempLog$(mktemp -u)
function addConfig() {dataIdurlencode $1contenturlencode $2curl -X POST -H ${contentType} http://$nacosAddr/nacos/v1/cs/configs?dataId$dataIdgroup$groupcontent$contenttenant$tenantusername$usernamepassword$password ${tempLog} 2/dev/nullif [ -z $(cat ${tempLog}) ]; thenecho Please check the cluster status. exit 1fiif [ $(cat ${tempLog}) true ]; thenecho Set $1$2 successfully elseecho Set $1$2 failure failCountexpr $failCount 1fi
}count0
for line in $(cat $(dirname $PWD)/config.txt | sed s/[[:space:]]//g); docountexpr $count 1key${line%%*}value${line#*}addConfig ${key} ${value}
doneecho
echo Complete initialization parameters, total-count:$count , failure-count:$failCount
echo if [ ${failCount} -eq 0 ]; thenecho Init nacos config finished, please start seata-server.
elseecho init nacos config fail.
fi
3. 配置导入nacos配置中心
将seata配置信息导入到nacos config配置中心 sh nacos-config.sh -h 127.0.0.1-h后面是nacos配置中心的地址 操作记录
[rootnode2 conf]# sh nacos-config.sh -h 127.0.0.1
set nacosAddr127.0.0.1:8848
set groupSEATA_GROUP
Set service.vgroupMapping.order-servicedefault successfully
Set store.modedb successfully
Set store.db.datasourcedruid successfully
Set store.db.dbTypemysql successfully
Set store.db.driverClassNamecom.mysql.cj.jdbc.Driver successfully
Set store.db.urljdbc:mysql://127.0.0.1:3306/ry-seata?useUnicodetrue successfully
Set store.db.userroot successfully
Set store.db.password123456 successfully
Set store.db.minConn5 successfully
Set store.db.maxConn30 successfully
Set store.db.globalTableglobal_table successfully
Set store.db.branchTablebranch_table successfully
Set store.db.queryLimit100 successfully
Set store.db.lockTablelock_table successfully
Set store.db.maxWait5000 successfully
Complete initialization parameters, total-count:15 , failure-count:0
Init nacos config finished, please start seata-server.
[rootnode2 conf]#4. 配置验证
执行完成后登录到nacos 查看配置中心的数据是否导入完毕如图所示
