购物网站建设过程视频,合肥网站制作网站,wordpress添加关键词后在哪能看到,电影网站开发api关于ubuntu亮度无法自动调节的问题#xff0c;纠结了我快两年#xff0c;主要是自己懒#xff0c;写了个脚本来调节亮度#xff0c;不过还是稍显不便。近日兴起折腾了一番#xff0c;终于找到问题根结了。There are many ways to control brightness. According to this d…关于ubuntu亮度无法自动调节的问题纠结了我快两年主要是自己懒写了个脚本来调节亮度不过还是稍显不便。近日兴起折腾了一番终于找到问题根结了。There are many ways to control brightness. According to this discussion[1] and this wiki page [2], the control method could be divided into these categories:brightness is controlled by vendor specified hotkey. And there is no interface for OS to adjust brightness.brightness is controlled by OS:brightness could be controlled by ACPIbrightness could be controlled by graphic driver.All methods expose themselves to the user by /sys/class/brightness. And xrandr/xbacklight could use this folder and choose one method to control brightness. But it is still not very clear which one xbacklight prefers by default. See FS#27677 for xbacklight, if you get No outputs have backlight property. There is a temporary fix if xrandr/xbacklight does not choose the right directory in /sys/class/brightness: You can specify the one you want in xorg.conf by setting the Backlight option of the Device section to the name of that directorybrightness is controlled by HW register throught setpciACPIIt is often possible to adjust the backlight by ACPI. This controls the actual LEDs or cathodes of the screen. When this ACPI option is available, the illumination is controllable using a GUI slider in the Display/Screen system settings or by simple commands on the CLI.Different cards might manage this differently. Check /sys/class/backlight to find out:# ls /sys/class/backlight/intel_backlightSo this particular backlight is managed by an Intel card. It is called acpi_video0 on an ATI card. In the following example, acpi_video0 is used.The directory contains the following files and folders:actual_brightness brightness max_brightness subsystem/ ueventbl_power device/ power/ typeThe maximum brightness (often 15) can be found by running cat:# cat /sys/class/backlight/acpi_video0/max_brightness15Brightness can then be set (as root) with echo. Obviously you cannot go any higher than your screens maximum brightness. The values for maximum brightness and brightness in general vary wildly among cards.# echo 5 /sys/class/backlight/acpi_video0/brightnessSometimes ACPI does not work well due to different motherboard implementations and ACPI quirks. This include some models with dual graphics (e.g. Nvidia-optimus/Radeon with intel (i915)) and some examples with this problem in notebooks such as Dell Studio, Dell XPS 14/15/17 and some Lenovo series, Kamal Mostafa kernel developer make patches for solved this issue included after 3.1 kernel version. You can try adding the following kernel parameters in your bootloader(grub, syslinux...) to adjust ACPI model:acpi_osiLinux acpi_backlightvendororacpi_osiLinux acpi_backlightlegacyacpi_backlightvendor will prefer vendor specific driver (e.g. thinkpad_acpi, sony_acpi, etc.) instead of the ACPI video.ko driver.看了这个之后很显然问题就在于acpi_backlightvendor will prefer vendor specific driver (e.g. thinkpad_acpi, sony_acpi, etc.) instead of the ACPI video.ko driver.所以我们只要sudo nano /etc/default/grub,GRUB_CMDLINE_LINUX“改为GRUB_CMDLINE_LINUXacpi_osiLinux acpi_backlightvendor重启即可注意大小写Linux的L为大写。然后sudo update-grub sudo reboot本文来源博客园 作者浮沉雄鹰
