天津做网站的网络公司,网络推广的优化方法,插画设计网站,厦门最快seo符合SEMI E4, E5, E30, E37 的 SECS/GEM通讯方案遵循 SEMI 人机交互设计#xff0c;提供触摸屏支持让你触手可及。毫米级的响应#xff0c;让设备行云流水般流畅。我们为你快速搭建PLC与MES之间的SECS/GEM桥梁SECS/GEM介绍SECS/GEM定义半导体生产设备与主机之间的通讯关系提供触摸屏支持让你触手可及。毫米级的响应让设备行云流水般流畅。我们为你快速搭建PLC与MES之间的SECS/GEM桥梁SECS/GEM介绍SECS/GEM定义半导体生产设备与主机之间的通讯关系通讯标准。SECS/GEM通讯规则如下图FAB负责MES进行控制整个车间的生产。符合SEMI E4, E5, E30, E37 的 SECS/GEM通讯方案遵循 SEMI 人机交互设计提供触摸屏支持让你触手可及。毫米级的响应让设备行云流水般流畅。我们为你快速搭建PLC与MES之间的桥梁无后顾之忧增删改上报数据配置简单并且一目了然大量的数据处理无需关心MES数据请求交由控制软件采用高并发多线程处理快速编码与解编码强大的日志功能可查询近一周的情况可视化中文界面让您的简单易学可搭配精小玲珑的超高性能主机方案是如此的简单齐全快速的搭建通讯成为自动化设备成为你突出的优势。但是但是我们SECS/GEM还远远不止这些这就是与其他厂商的不同点所在设备供应商不需要关心SECS/GEM的实现里面已经集成Event和支持动态配置报表Report数据上报等大量内容最最最主要的是我们是毫秒级响应不像一些供应商。采用XML或者ini进行中间转发那速度你也是明白的。当你们需要添加新资料时候随时可以自行添加或者咨询我们添加方法。添加方法我们会在交付时候进行指导得清清楚楚。这些SECS/GEM内容我们都会保存在本地无需担心开机与关机导致数据丢失问题。SECS/GEM远程控制我们采用回调处理方式在第一时间内反馈给你。我们时刻遵循着最新的协议让你的设备走在行业领先。功能全方位考虑清楚久经考验。In many equipment control applications there is a need for a GEM host to modify one or a small set ofprocess parameters associated with a recipe. The number of parameters modified, frequency of modification (e.g.,wafer-to-wafer, batch-to-batch, etc.), range of modification, etc., is largely a function of the equipment controlapplication. Utilizing SECS/GEM, at least two methods are envisioned for modifying process parameters on a tool. With thefirst method, ‘Equipment Constants’ can be used to relate process parameters of the updated recipe. EquipmentConstants can also be used in a mode where they relate suggested modifications to process parameters from the storedrecipe; that is, the constants contain only the ± differential from a nominal value. The former mode is preferred becauseit better ensures data integrity between the controller and tool. With the second method the entire recipe could bedownloaded, but this results in an enormous amount of communication overhead. Note that, in all cases, the EquipmentConstants do not replace the process parameters inside a recipe, but are associated with (e.g., linked to) theseparameters to relate modifications. The remainder of this application note provides a description of how processparameter modification can be implemented using existing GEM capabilities. The method may be used in a SECS/GEMcompliant system provided that the specific GEM capabilities described are supported.The equipment constants should represent the actual values of the process parameters with which they areassociated. Depending on the equipment operation and control application, the equipment constant could representthe actual value of a process parameter at a recipe step, or over the entire recipe. The equipment constants could alsobe utilized to represent the differentials of process parameters from nominal values. However it is important to notethat, when using differential values to relate process parameter modifications, any loss of synchronization betweenequipment and host could result in an incorrect assessment of the value of a process setpoint by the host. Note alsothat, upon system startup, and whenever the appropriate process parameters are modified, the equipment constantsshould also be modified as necessary to always reflect the (absolute or relative) values of the associated process
